Category: Articles
Articles that can include everything from installations to reviews and more.
-
Mazda MX-5 MK3/NC – How To Depin ECU connectors/plugs
Intro So if you’ve got a modified NC and you want to remove a lot of factory junk from the wiring harness but want to completely remove it? Well you’re going to need to depin the stock ECU A & B plugs. This real quick article shows and explains how. Hopefully I can save you…
Written by
-
Mazda MX-5 MK3/NC – Haltech First Start Preparations
Thumbnail Credits: Devin / Instagram: @nc1_devin What are we going to do? To briefly summaries, we will connect to the ECU via the laptop and upgrade the firmware so we can make use of the newer and better Haltech NSP (Nexus Software Programmer). Yes, Haltech kindly allow you to use the later Nexus series ECU’s…
Written by
-
Mazda MX-5 MK3/NC – Haltech Elite 1500 Install
Thumbnail Credits: Casper Zawada But, what was wrong with the stock ECU?? Before we start, we need to clarify a few basic facts. Firstly, the stock ECU can run the stock 1.8/2.0 litre MZR/LF engine when the engine is turbocharged or supercharged. In fact, the leading UK tuner BBR has been tuning NC’s while utilizing…
Written by
-
Mazda MX-5 MK3/NC – Custom Wastegate Actuator
Thumbnail Credits: Maciej / Instagram: @fallenangellife / TikTok: @advanmsnc Why custom? So, prior to offering the turbo and manifold combination onto the engine. It is comprised of a new Garrett T25 GT2871R 0.64 A/R bolted to a Kraken cast-iron top-mount manifold. I have purchased a Turbosmart IWG75 to use in conjunction with a three-port MAC…
Written by
-
Mazda MX-5 MK3/NC – Phone Mount Solution
Thumbnail Credits: Jack M / TikTok: @mcbriarty_ Brief overview. So, I’ve been wanting a high quality, stable phone mount in my NC1 for a while now. Until then I’ve been placing my iPhone 12 in my I.L. Motorsport centre storage compartment (cupholder delete). This was fine for about three years. But now I’ve been keen…
Written by
-
Mazda MX-5 MK3/NC – Aftermarket Steering-Wheel Install
Thumbnail Credits: Ethan Butler / TikTok: @Ethan5002 Are you overwhelmed? Have you been looking at trying to install an aftermarket steering-wheel in your Mazda but confused and frankly overwhelmed by the options out there? I’ll clear everything up for you. Letting you make all the right decisions. What parts do I need to buy? Let’s…
Written by
-
Mazda MX-5 MK3/NC – Bucket Seat Guide
Thumbnail Credits: Eddie Beck / Instagram: @eddiebecke42 What seats fit the NC interior space? My personal vehicle My seat setup uses Sparco EVO QRT’s (Regular size) with Cybul base mounts. The driver side has custom side-mounts Cybul made free of labour charge in order for myself (I’m 5ft 8″) to sit closer to the pedals…
Written by
